Code Switching Topic: CLAN commands

[Toh An]

Thank you for the recommendations! 

For KEYMAP, the manual says that "On the coding tier, keymap will look only 
for symbols beginning with the $ sign. All other strings will be ignored." 
Do I have to code the dependent tiers starting with the $ sign? I tried 
using the command "keymap +b1.2* +t%xcod  @" but it does not produce any 
results or output.

 

On Monday, April 30, 2018 at 3:35:52 AM UTC+8, macw wrote:
>
> Dear Toh An,
>     Yes, you could probably analyze these using some form of a COMBO 
> command.  However, the type of code chain structure you seem to be studying 
> might be better analyzed using either the KEYMAP or CHAINS commands.  Why 
> don't you take a look at the description of those in the manual to see if 
> they correspond to what you are trying to do.  
>
> --Brian MacWhinney
>
> On Apr 29, 2018, at 3:27 PM, Toh An <pops... at gmail.com <javascript:>> 
> wrote:
>
> These are the COMBO commands which I have used which do not seem to work:
>
> combo +t*TE1 +s"t%xcod: 1.2^*^t%xtsf: 4.5" +t%xcod +t%xtsf
>
> combo +b2 +s"%xcod: 1.3^*^%xcod: 2.5" +t%xcod +t%xcod
>
> On Monday, April 30, 2018 at 3:21:58 AM UTC+8, Toh An wrote:
>>
>> Dear all, 
>>
>> I have some questions on the use of COMBO commands to analyse code 
>> switching topics in utterances.
>>
>> Firstly, I want to do a count of specific tier combinations (the same 
>> tier; different codes), in a specific sequence across clusters using the 
>> COMBO command.
>>
>>  
>> e.g.:
>> **TE1:*  utterance
>> %xcod: 1.3
>> %xtsf: 4.8
>> **CH3:* utterance
>> %xcod: 2.5
>> %xcsf: 5.4
>> è  I want to be able to specify the command to count the instances where 
>> %xcod:  1.3 is followed by another code on the same tier %xcod:  2.5 but 
>> across different clusters.
>> è To use the command to count the instances of different sequences (for 
>> example 1.1à2.5/ 2.6/ 2.7)
>>
>>  
>> Secondly, I want to do a count of specific tier combinations (different 
>> tiers; different codes), in a specific sequence within clusters using the 
>> COMBO command
>>
>>  
>> e.g.:
>> **CH3*: utterance
>> %xcod: 1.7
>> %xcsf: 5.4
>> **TE1*:  utterance
>> %xcod: 1.2
>> %xtsf: 4.2
>> **CLS:*  utterance
>> %xcod: 1.6
>> è  I want to be able to specify the command to count the instances where 
>> %xcod:  1.2 is followed by another code on a different tier %xtsf:  4.2 
>> within the same clusters.
>> è To use the command to count the instances of different sequences (for 
>> example 1.1à4.1/4.2/4.3/4.4/4.5/4.6/4.7/4.8)
>>
>>  
>>
>>  
>> Note:
>> As shown above some utterances have two tiers of codes. All utterances 
>> have the %xcod tier while some utterances by the speaker **TE1* have the 
>> tier %xtsf, and some utterances by the speaker **CH#/CLS* have the %xcsf
>>  tier.
>> However, other utterances may not have two tiers, and only have the 
>> %xcod tier.
>> e.g.:
>>
>>  
>> **TE1:*  utterance
>> %xcod: 1.2
>> **CH4:* utterance
>> %xcod: 2.6
>> **TE1:*  utterance
>> %xcod: 3.2
>> **TE1:*  utterance
>> %xcod: 3.3
>> %xtsf:  4.8
>>
>>  
>> I have tried using the following COMBO commands but they do not seem to 
>> produce results in the CLAN window. Could you provide some suggestions?
>>
>> Thank you so much.
>>
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "chibolts" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to chibolts+u... at googlegroups.com <javascript:>.
> To post to this group, send email to chib... at googlegroups.com 
> <javascript:>.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/chibolts/254d4cc7-b995-4c51-807c-b622aaedd79d%40googlegroups.com 
> <https://groups.google.com/d/msgid/chibolts/254d4cc7-b995-4c51-807c-b622aaedd79d%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
> For more options, visit https://groups.google.com/d/optout.
>
>
>

-- 
You received this message because you are subscribed to the Google Groups "chibolts" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chibolts+unsubscribe at googlegroups.com.
To post to this group, send email to chibolts at googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/chibolts/1df5ac85-abbd-48fb-a12d-f9a2fa8596ba%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listserv.linguistlist.org/pipermail/chibolts/attachments/20180429/ce20984d/attachment.htm>