Code Switching Topic: CLAN commands

Brian MacWhinney macw at cmu.edu
Sun Apr 29 16:13:17 EDT 2018


Yes, you would need to add the $ sign.

--Brian

> On Apr 29, 2018, at 4:11 PM, Toh An <popsune1 at gmail.com> wrote:
> 
> Thank you for the recommendations! 
> 
> For KEYMAP, the manual says that "On the coding tier, KEYMAP will look only for symbols beginning with the $ sign. All other strings will be ignored." Do I have to code the dependent tiers starting with the $ sign? I tried using the command "keymap +b1.2* +t%xcod  @" but it does not produce any results or output.
> 
>  
> 
> On Monday, April 30, 2018 at 3:35:52 AM UTC+8, macw wrote:
> Dear Toh An,
>     Yes, you could probably analyze these using some form of a COMBO command.  However, the type of code chain structure you seem to be studying might be better analyzed using either the KEYMAP or CHAINS commands.  Why don't you take a look at the description of those in the manual to see if they correspond to what you are trying to do.  
> 
> --Brian MacWhinney
> 
>> On Apr 29, 2018, at 3:27 PM, Toh An <pops... at gmail.com <>> wrote:
>> 
>> These are the COMBO commands which I have used which do not seem to work:
>> 
>> combo +t*TE1 +s"t%xcod: 1.2^*^t%xtsf: 4.5" +t%xcod +t%xtsf
>> 
>> combo +b2 +s"%xcod: 1.3^*^%xcod: 2.5" +t%xcod +t%xcod
>> 
>> On Monday, April 30, 2018 at 3:21:58 AM UTC+8, Toh An wrote:
>> Dear all, 
>> 
>> I have some questions on the use of COMBO commands to analyse code switching topics in utterances.
>> 
>> Firstly, I want to do a count of specific tier combinations (the same tier; different codes), in a specific sequence across clusters using the COMBO command.
>>  
>> e.g.:
>> *TE1:  utterance
>> %xcod: 1.3
>> %xtsf: 4.8
>> *CH3: utterance
>> %xcod: 2.5
>> %xcsf: 5.4
>> è  I want to be able to specify the command to count the instances where %xcod:  1.3 is followed by another code on the same tier %xcod:  2.5 but across different clusters.
>> è To use the command to count the instances of different sequences (for example 1.1à2.5/ 2.6/ 2.7)
>>  
>> Secondly, I want to do a count of specific tier combinations (different tiers; different codes), in a specific sequence within clusters using the COMBO command
>>  
>> e.g.:
>> *CH3: utterance
>> %xcod: 1.7
>> %xcsf: 5.4
>> *TE1:  utterance
>> %xcod: 1.2
>> %xtsf: 4.2
>> *CLS:  utterance
>> %xcod: 1.6
>> è  I want to be able to specify the command to count the instances where %xcod:  1.2 is followed by another code on a different tier %xtsf:  4.2 within the same clusters.
>> è To use the command to count the instances of different sequences (for example 1.1à4.1/4.2/4.3/4.4/4.5/4.6/4.7/4.8)
>>  
>>  
>> Note:
>> As shown above some utterances have two tiers of codes. All utterances have the %xcod tier while some utterances by the speaker *TE1 have the tier %xtsf, and some utterances by the speaker *CH#/CLS have the %xcsf tier.
>> However, other utterances may not have two tiers, and only have the %xcod tier.
>> e.g.:
>>  
>> *TE1:  utterance
>> %xcod: 1.2
>> *CH4: utterance
>> %xcod: 2.6
>> *TE1:  utterance
>> %xcod: 3.2
>> *TE1:  utterance
>> %xcod: 3.3
>> %xtsf:  4.8
>>  
>> I have tried using the following COMBO commands but they do not seem to produce results in the CLAN window. Could you provide some suggestions?
>> 
>> Thank you so much.
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups "chibolts" group.
>> To unsubscribe from this group and stop receiving emails from it, send an email to chibolts+u... at googlegroups.com <>.
>> To post to this group, send email to chib... at googlegroups.com <>.
>> To view this discussion on the web visit https://groups.google.com/d/msgid/chibolts/254d4cc7-b995-4c51-807c-b622aaedd79d%40googlegroups.com <https://groups.google.com/d/msgid/chibolts/254d4cc7-b995-4c51-807c-b622aaedd79d%40googlegroups.com?utm_medium=email&utm_source=footer>.
>> For more options, visit https://groups.google.com/d/optout <https://groups.google.com/d/optout>.
> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups "chibolts" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to chibolts+unsubscribe at googlegroups.com <mailto:chibolts+unsubscribe at googlegroups.com>.
> To post to this group, send email to chibolts at googlegroups.com <mailto:chibolts at googlegroups.com>.
> To view this discussion on the web visit https://groups.google.com/d/msgid/chibolts/1df5ac85-abbd-48fb-a12d-f9a2fa8596ba%40googlegroups.com <https://groups.google.com/d/msgid/chibolts/1df5ac85-abbd-48fb-a12d-f9a2fa8596ba%40googlegroups.com?utm_medium=email&utm_source=footer>.
> For more options, visit https://groups.google.com/d/optout <https://groups.google.com/d/optout>.

-- 
You received this message because you are subscribed to the Google Groups "chibolts" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chibolts+unsubscribe at googlegroups.com.
To post to this group, send email to chibolts at googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/chibolts/D7E96706-A290-4F33-97FC-DDD5146A14E5%40cmu.edu.
For more options, visit https://groups.google.com/d/optout.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listserv.linguistlist.org/pipermail/chibolts/attachments/20180429/efa468a1/attachment-0001.html>


More information about the Chibolts mailing list