Participant likert scale

[Michiel Spape]

Hiya,
Yes, well, I suppose you probably already figured this out, but the idea would be to add another inline after the last textdisplay, and don't do the end-action = jump label. With the bit of code in this inline, you'd 1) check response, 2) reset to 0 as in:
switch (ResponseDisplay.Resp)
{
    case "1": myNRESP+=1; if (myNRESP > 7) {myNRESP = 0;} goto PreJump; break;
    case "2": myNRESP-=1; if (myNRESP < 0) {myNRESP = 0;} goto PreJump; break;
    default: break;
}

You can see the above is a little mix of c# and e-basic. This is because A) c# is beautiful, B) I tend to forget the specifics of basic syntax (certainly regarding the switch statement), C) the proper way is somewhere in the e-basic help, and it pays to learn a bit.

PS: David, and my fellow geeks, perhaps you'll enjoy this as much as I did: http://www.addedbytes.com/blog/if-php-were-british/


Cheers,
Mich

Michiel Spapé
Research Fellow
Perception & Action group
University of Nottingham
School of Psychology
www.cognitology.eu


-----Original Message-----
From: e-prime at googlegroups.com [mailto:e-prime at googlegroups.com] On Behalf Of Neil McLatchie
Sent: 01 September 2011 18:21
To: E-Prime
Subject: Re: Participant likert scale

Thank you kindly for your help!

At the moment I am using the mouse to increase the number. However,
both buttons are doing the same thing, and there is no limit - I can
click as many times as I like within the set time.

If there is any way of a) looping the number so that once it gets to 7
it loops back round to 1, and b) to differentiate between right
clicking increasing the number and left clicking terminating, it would
be great.

Thanks again for the help I've already received!

Cheers,
Neil

On Sep 1, 5:40 pm, Michiel Spape <Michiel.Sp... at nottingham.ac.uk>
wrote:
> Like so!
> ...i was writing:
> Hiya,
> I think those pretty much *were* babysteps, provided you've done enough with E-Prime to really work on it. If not, try having a go at the tutorial or the E-Primer (link elsewhere on this list, or on my own homepage around "about me"). It will be worth your while, and doesn't take all that long.
>
> Anyway, as said:
> Add an inline (just drag it), and copy-paste the following TWO lines:
> ------
> myNRESP = myNRESP + 1 'adds 1 to number of responses - the baseline of your code
> c.SetAttrib "NRESP", myNRESP 'saves the number of responses
> ------
>
> That adds, automatically the attribute, even if you don't have a list. You'll ultimately need a list somewhere anywhere, but for now, this works.
> Best,
> Mich
>
> Michiel Spapé
> Research Fellow
> Perception & Action group
> University of Nottingham
> School of Psychologywww.cognitology.eu
>
> -----Original Message-----
> From: e-prime at googlegroups.com [mailto:e-prime at googlegroups.com] On Behalf Of Neil McLatchie
> Sent: 01 September 2011 17:37
> To: E-Prime
> Subject: Re: Participant likert scale
>
> Hi again, sorry about the confusion earlier.
>
> I've done what you suggested. I'm a little thrown by part of 4. I've
> done everything else, but where do i create this attribute? Do i just
> put a list after the second inline and create it?
>
> On Sep 1, 5:15 pm, Michiel Spape <Michiel.Sp... at nottingham.ac.uk>
> wrote:
> > Hi Neil,
> > So, if I'm correct, this should be it, let me know if I forgot something. Add the following to some procedure:
> > 1. TextDisplay, I'm calling it question. You can insert the question here ("how guilty") etc.
> > 2. Inline with code:
> > dim myNRESP as integer 'initializes an integer
> > myNRESP = -1 'sets it to -1, for reasons that should be clear later
> > 3. Label, called PreJump
> > 4. Inline with code
> > myNRESP = myNRESP + 1 'adds 1 to number of responses - the baseline of your code
> > c.SetAttrib "NRESP", myNRESP 'saves the number of responses
> > 5. TextDisplay, I called it ResponseDisplay. It displays the following text [NRESP] (after the attribute created earlier); a maximum duration of whatever you'd like to be the final duration of your responses hammering (I made it 1000 ms here, default). An input object (I used my keyboard, any button allowed). And most important: end action: jump to label: PreJump.
>
> > Voila - tested, works. Only thing to do is dump all this in a list and add your likert questions.
> > Cheers,
> > Mich
>
> > Michiel Spapé
> > Research Fellow
> > Perception & Action group
> > University of Nottingham
> > School of Psychologywww.cognitology.eu
>
> > -----Original Message-----
> > From: e-prime at googlegroups.com [mailto:e-prime at googlegroups.com] On Behalf Of Neil McLatchie
> > Sent: 01 September 2011 17:02
> > To: E-Prime
> > Subject: Participant likert scale
>
> > Hi everyone,
>
> > I'm quite new to this and am about to do my first fMRI study. I
> > basically need to ask participants to provide feedback of how they are
> > feeling whilst in the scanner. However, due to being in an fMRi, they
> > can't talk or move, except they have a button in each hand.
>
> > Ideally I would like to be able to ask them e.g. 'how guilty do you
> > feel right now' and have a '0' appear in the middle of the screen.
> > They then click the right button from 1-7 times to let me know how
> > guilty they are feeling at that instance. If possible, I would like it
> > to somehow loop, so that if they by accident push the right button 8
> > times, it just loops back to 0. It would be good if they could then
> > confirm (terminate the slide) with the left button.
>
> > As I'm not working the with fmri for another couple of weeks, it would
> > be good if I could have a practice with this using two buttons on a
> > keyboard, but I've no idea where to begin.
>
> > Any help welcome!
>
> > Cheers,
> > Neil
>
> > --
> > You received this message because you are subscribed to the Google Groups "E-Prime" group.
> > To post to this group, send email to e-prime at googlegroups.com.
> > To unsubscribe from this group, send email to e-prime+unsubscribe at googlegroups.com.
> > For more options, visit this group athttp://groups.google.com/group/e-prime?hl=en.
>
> > This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it.   Please do not use, copy or disclose the information contained in this message or in any attachment.  Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham.
>
> > This message has been checked for viruses but the contents of an attachment
> > may still contain software viruses which could damage your computer system:
> > you are advised to perform your own checks. Email communications with the
> > University of Nottingham may be monitored as permitted by UK legislation.
>
> --
> You received this message because you are subscribed to the Google Groups "E-Prime" group.
> To post to this group, send email to e-prime at googlegroups.com.
> To unsubscribe from this group, send email to e-prime+unsubscribe at googlegroups.com.
> For more options, visit this group athttp://groups.google.com/group/e-prime?hl=en.
>
> This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it.   Please do not use, copy or disclose the information contained in this message or in any attachment.  Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham.
>
> This message has been checked for viruses but the contents of an attachment
> may still contain software viruses which could damage your computer system:
> you are advised to perform your own checks. Email communications with the
> University of Nottingham may be monitored as permitted by UK legislation.
>
>
>
>  Untitled.es
> 9KViewDownload

-- 
You received this message because you are subscribed to the Google Groups "E-Prime" group.
To post to this group, send email to e-prime at googlegroups.com.
To unsubscribe from this group, send email to e-prime+unsubscribe at googlegroups.com.
For more options, visit this group at http://groups.google.com/group/e-prime?hl=en.

This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it.   Please do not use, copy or disclose the information contained in this message or in any attachment.  Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham.

This message has been checked for viruses but the contents of an attachment
may still contain software viruses which could damage your computer system:
you are advised to perform your own checks. Email communications with the
University of Nottingham may be monitored as permitted by UK legislation.

-- 
You received this message because you are subscribed to the Google Groups "E-Prime" group.
To post to this group, send email to e-prime at googlegroups.com.
To unsubscribe from this group, send email to e-prime+unsubscribe at googlegroups.com.
For more options, visit this group at http://groups.google.com/group/e-prime?hl=en.