After update, stimulus wont play if video is rotated 180 degrees

[Mark Burlingame]

I figured it out, just in case someone hits the same issue.  There is a 
display setting under the edit/experiments/devices/display/edit there is a 
toggle "Flipping enabled" that must be toggled to yes.  Mark

On Saturday, November 2, 2013 10:40:31 AM UTC-7, Mark Burlingame wrote:
>
> Hello Everyone,
>   I am an MRI tech at UCSF and we present stimulus via eprime, 
> presentation, and Matlab.  The monitor is view via a mirror so we have flip 
> the image upsidedown so it displays properly.  Unfortunately when I 
> upgraded from an older installation of eprime 2 to service pack 1 .353 
> build irrc, the scripts start and the patient number and information can be 
> entered, but the "ready" or instruction screens don't display when I have 
> the image inverted using the diplay driver settings.  I have tried it with 
> both Nvidia and AMD graphics cards and drivers.  The scripts run just fine 
> if I don't invert the image.  Of course, they need to be inverted to work 
> for our studies.  Any help would be greatly appreciated.  thanks, Mark
>

-- 
You received this message because you are subscribed to the Google Groups "E-Prime" group.
To unsubscribe from this group and stop receiving emails from it, send an email to e-prime+unsubscribe at googlegroups.com.
To post to this group, send email to e-prime at googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/e-prime/d308c09c-0db0-412b-9511-d17e110b9871%40googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listserv.linguistlist.org/pipermail/eprime/attachments/20131104/22abd49a/attachment.htm>