<div dir="ltr">Hi Mich,<br><br>We installed everything on a different machine, and it worked perfectly! <br>There is a Radix card installed on the original computer, and we suspect that this was the source of the problem. We will try to remove it tomorrow and see how it goes. <br>
<br>Anyway - thanks a lot for all your help!<br><br>Roni <br><br><div class="gmail_quote">2009/8/5 Michiel Spape <span dir="ltr"><<a href="mailto:Michiel.Spape@nottingham.ac.uk">Michiel.Spape@nottingham.ac.uk</a>></span><br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div link="blue" vlink="purple" lang="EN-GB">
<div>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Hi Roni,</span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Bummer. No, that would indeed suggest that rather than anything
in E-Prime, there seems to be something malfunctioning in the driver. Have you
tried running the experiment, with the SRBox, on a different computer? </span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);">I tried to create an experiment like I suggested below and
(though I have no SRBox in my office) added the SRBox, BUT disabled the PST
Serial Response Box driver. This caused the exact same crash as your
screenshot. Re-enabling the PST Serial Response Box Driver in device manager
caused my experiment to run normally (though, of course, I couldn’t get
very far without the actual PST box). So, you might try uninstalling this
particular driver and reinstalling it. Perhaps there’s a little installer
for it in the E-Prime setup?</span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);">The PST SRBox Driver is supposed to be where you show it, by the
way. It looks ugly in its unrecognised state, but it’s always been like
that (if I am correctly, even under win98).</span></p><div class="im">
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Cheers,</span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Mich</span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p><i><span style="font-size: 10pt; color: rgb(31, 73, 125);">Michiel Spapé</span></i></p>
<p><i><span style="font-size: 10pt; color: rgb(31, 73, 125);">Research Fellow</span></i></p>
<p><i><span style="font-size: 10pt; color: rgb(31, 73, 125);">Perception & Action group</span></i></p>
<p><i><span style="font-size: 10pt; color: rgb(31, 73, 125);">University of Nottingham</span></i></p>
<p><i><span style="font-size: 10pt; color: rgb(31, 73, 125);">School of Psychology</span></i><i><span style="font-size: 10pt; color: rgb(31, 73, 125);"></span></i></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
</div><div style="border-style: solid none none; border-color: rgb(181, 196, 223) -moz-use-text-color -moz-use-text-color; border-width: 1pt medium medium; padding: 3pt 0cm 0cm;">
<p><b><span style="font-size: 10pt;" lang="EN-US">From:</span></b><span style="font-size: 10pt;" lang="EN-US"> <a href="mailto:e-prime@googlegroups.com" target="_blank">e-prime@googlegroups.com</a>
[mailto:<a href="mailto:e-prime@googlegroups.com" target="_blank">e-prime@googlegroups.com</a>] <b>On Behalf Of </b>Roni Tibon<br>
<b>Sent:</b> 05 August 2009 10:43<div class="im"><br>
<b>To:</b> <a href="mailto:e-prime@googlegroups.com" target="_blank">e-prime@googlegroups.com</a><br>
</div><b>Subject:</b> Re: SRBox problem</span></p>
</div>
<p> </p>
<div><div><div></div><div class="h5">
<div>
<p>Hi Mich,</p>
</div>
<div>
<p>Thank you for your reply!</p>
</div>
<div>
<p> </p>
</div>
<div>
<p>The box was added to the experimet preoperties.</p>
</div>
<div>
<p> </p>
</div>
<div>
<p>I followed what you suggested - running a simple experiment
with just the srbox, and got the same error message.</p>
</div>
<div>
<p>The lights did not turn off when I started the experiment.
Does it mean that e-prime doesn't connect with the box? </p>
</div>
<div>
<p> </p>
</div>
<div>
<p>I'd love to hear from you, or any one else, if there's
anything else I should check or do, before trying to uninstall the program.</p>
</div>
<div>
<p> </p>
</div>
<div>
<p>Thanks!</p>
</div>
<div>
<p>Roni </p>
</div>
</div></div><div><div><div></div><div class="h5">
<p>2009/8/5 Michiel Spape <<a href="mailto:Michiel.Spape@nottingham.ac.uk" target="_blank">Michiel.Spape@nottingham.ac.uk</a>></p>
</div></div><div><div><div></div><div class="h5">
<div>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Hi Roni,</span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Not much, just the following:
have you actually added it to Experiment Properties
(edit>experiment>devices>add SRBOX, make sure it is actually on),
rather than, for instance, a SERIAL object? If it is, you could turn it off and
on (all lights on the SRBOX should light up) and see if the lights turn off
when you start the experiment. Make it a blank experiment, change nothing in
the SRBOX properties, and see whether adding only one text display with
infinite duration and only the SRBOX as input object turns off.</span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Other than that, I can’t
imagine much else goes wrong, unless the device installation went awry at some
point during E-Prime installation. You could try re-installing e-prime.</span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Cheers,</span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Mich</span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p><i><span style="font-size: 10pt; color: rgb(31, 73, 125);">Michiel Spapé</span></i></p>
<p><i><span style="font-size: 10pt; color: rgb(31, 73, 125);">Research Fellow</span></i></p>
<p><i><span style="font-size: 10pt; color: rgb(31, 73, 125);">Perception & Action
group</span></i></p>
<p><i><span style="font-size: 10pt; color: rgb(31, 73, 125);">University of Nottingham</span></i></p>
<p><i><span style="font-size: 10pt; color: rgb(31, 73, 125);">School of Psychology</span></i></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<div style="border-style: solid none none; border-color: rgb(181, 196, 223) -moz-use-text-color -moz-use-text-color; border-width: 1pt medium medium; padding: 3pt 0cm 0cm;">
<p><b><span style="font-size: 10pt;" lang="EN-US">From:</span></b><span style="font-size: 10pt;" lang="EN-US"> <a href="mailto:e-prime@googlegroups.com" target="_blank">e-prime@googlegroups.com</a> [mailto:<a href="mailto:e-prime@googlegroups.com" target="_blank">e-prime@googlegroups.com</a>]
<b>On Behalf Of </b>Roni Tibon<br>
<b>Sent:</b> 05 August 2009 09:43<br>
<b>To:</b> <a href="mailto:e-prime@googlegroups.com" target="_blank">e-prime@googlegroups.com</a><br>
<b>Subject:</b> Fwd: SRBox problem</span></p>
</div>
<div>
<div>
<p> </p>
<div>
<div>
<div>
<div>
<p>Hi all,</p>
</div>
<div>
<p> </p>
</div>
<div>
<p>We're experiencing some problems with a serial response box we have recently
puchased (model 200A). When trying to run an experiment in E-Prime using the
box we get an error message numbered 10051 (see image SRBox1.jpg). We are
running E-Prime 2 on a Windows XP computer.</p>
</div>
<div>
<p> </p>
</div>
<div>
<p>The SRBox is connected to the actual port (and not to a serial-to-USB
adapter). </p>
</div>
<div>
<p> </p>
</div>
<div>
<p>The drivers are installed on the machine, and the device is well connected.
We couldn't locate any conflicting ports, and we have full privileges on the
machine. We also tried changing the "bits per second" property for
the port (under device manager) to 19,200, but it didn't help.<br>
</p>
</div>
<div>
<p>Attached is a screenshot of the device manager (SRBox2.jpg). As you can see,
the SRBox appears under "Other devices", and not under
"Communications Port". Could this be the problem? What might cause
it? <br>
<br>
However - when I tested the box using the SRBoxTester, everything looked OK
(see attached image - SRBox3.jpg - which was taken while holding keys 2 &
3) . <br>
<br>
Any suggestions? </p>
</div>
<div>
<p> </p>
</div>
<div>
<p>Thanks,</p>
</div>
<div>
<p>Roni</p>
</div>
</div>
</div>
<p> </p>
</div>
<p style="margin-bottom: 12pt;"> </p>
</div>
</div>
</div>
<p style="margin-bottom: 12pt;"> </p>
</div></div><p>This message has been checked for viruses but the contents of an attachment
may still contain software viruses, which could damage your computer system:
you are advised to perform your own checks. Email communications with the
University of Nottingham may be monitored as permitted by UK legislation. </p>
<p> </p>
</div>
<p> </p>
</div>
<p style="margin-bottom: 12pt;"><br>
</p></div>
</div><div class="im">
<br>
</div></div><div><div></div><div class="h5">
<br>
<p>
This message has been checked for viruses but the contents of an attachment
may still contain software viruses, which could damage your computer system:
you are advised to perform your own checks. Email communications with the
University of Nottingham may be monitored as permitted by UK legislation.
</p>
<br>
</div></div></blockquote></div><br></div>
<br>
--~--~---------~--~----~------------~-------~--~----~<br>
You received this message because you are subscribed to the Google Groups "E-Prime" group. <br> To post to this group, send email to e-prime@googlegroups.com <br> To unsubscribe from this group, send email to e-prime+unsubscribe@googlegroups.com <br> For more options, visit this group at http://groups.google.com/group/e-prime?hl=en<br>
-~----------~----~----~----~------~----~------~--~---<br>
<br>