The latest version. I'm not at my computer at this moment (and heading to a conference for the weekend) but it was a fresh install of windows 7 64 (because I swapped out the hard drive for a solid state).<div>So all up to date drivers and downloaded the latest eprime 2 (professional).</div><div>It runs the sample eprime programs fine but anything that attempts to access the serial or parallel ports crashes eprime. </div><div><br></div><div>I'd read both that windows 7 is more restrictive in allowing access to that level of data I/O than xp so was wondering if swapping to xp would solve the problem or if it's a non-mother board pci card issue.</div><div>Sadly, I don't have a handy xp computer without mother board ports that I can pop the pci card in and play with (they all seem to be either windows 7 or xp with mother board ports..but I thought that might help isolate the problem. Still waiting to hear back from pstnet support). I will post when I hear from them in case others face similar problems. </div><div> <br><div><br><br>On Monday, January 14, 2013 2:20:24 PM UTC-5, McFarlane, David wrote:<blockquote class="gmail_quote" style="margin: 0;margin-left: 0.8ex;border-left: 1px #ccc solid;padding-left: 1ex;">Stuart,
<br>
<br>What version of E-Prime?
<br>
<br>-----
<br>David McFarlane
<br>E-Prime training
<br>online: <a href="http://psychology.msu.edu/Workshops_Courses/eprime.aspx" target="_blank">http://psychology.msu.edu/<wbr>Workshops_Courses/eprime.aspx</a>
<br>Twitter: @EPrimeMaster (<a href="https://twitter.com/EPrimeMaster" target="_blank">https://twitter.com/<wbr>EPrimeMaster</a>)
<br>
<br>/----
<br>Stock reminder: 1) I do not work for PST. 2) PST's trained staff
<br>take any and all questions at
<br><a href="http://support.pstnet.com/e%2Dprime/support/login.asp" target="_blank">http://support.pstnet.com/e%<wbr>2Dprime/support/login.asp</a> , and they
<br>strive to respond to all requests in 24-48 hours, so make full use of
<br>it. 3) In addition, PST takes questions at their Facebook page
<br>(<a href="http://www.facebook.com/pages/Psychology-Software-Tools-Inc/241802160683" target="_blank">http://www.facebook.com/<wbr>pages/Psychology-Software-<wbr>Tools-Inc/241802160683</a>
<br>), and offers several instructional videos there and on their YouTube
<br>channel (<a href="http://www.youtube.com/user/PSTNET" target="_blank">http://www.youtube.com/user/<wbr>PSTNET</a> ) (no Twitter feed yet,
<br>though). 4) If you do get an answer from PST staff, please extend
<br>the courtesy of posting their reply back here for the sake of others.
<br>\----
<br>
<br>
<br>
<br>At 1/12/2013 10:44 AM Saturday, Stuart Quirk wrote:
<br>>Hello all and thanks in advance for any feedback.
<br>>
<br>>I've recently upgraded my primary lab computer and installed a pcie
<br>>combo parallel port/serial port (I had used both motherboard serial
<br>>port for the SRBOX and parallel port send a ttl signal to trigger my
<br>>eye tracker).
<br>>I got a manufacturer indicated by pstnet as one people have had some
<br>>luck with:
<br>><<a href="http://www.siig.com/it-products/serial-parallel/combo/pcie/cyber-1s1p-pcie.html" target="_blank">http://www.siig.com/it-<wbr>products/serial-parallel/<wbr>combo/pcie/cyber-1s1p-pcie.<wbr>html</a>><a href="http://www.siig.com/it-products/serial-parallel/combo/pcie/cyber-1s1p-pcie.html" target="_blank">http://www.siig.com/it-<wbr>products/serial-parallel/<wbr>combo/pcie/cyber-1s1p-pcie.<wbr>html</a>
<br>>
<br>>It installed fine but eprime crashes when I attempt to run the
<br>>utilities program for the SRBOX and pstnet's tester program fails to
<br>>find the box. And my simple parallel port monitor program (parmon)
<br>>doesn't find the port either.
<br>>In xp (on my last computer) I was able to use inpout32.dll and then
<br>>just insert very simple inline scripts to set the address high/low
<br>>within my experiment. From what I could learn (and understand as a
<br>>nonprogrammer) inpout64x.dll is much less successful with pci cards
<br>>under windows 7 64
<br>>
<br>>So I'm trying to figure out is my problem the OS (as in would I have
<br>>better luck moving the OS to xp?) or is my problem a PCI card? It
<br>>will take me a good chunk of more time to wipe everything and
<br>>install xp so I thought someone here might help me save some time if
<br>>that would be a pointless exercise.
<br>>
<br>>Thanks again
<br>>Stuart
<br>
<br></blockquote></div></div>
<p></p>
-- <br />
You received this message because you are subscribed to the Google Groups "E-Prime" group.<br />
To post to this group, send email to e-prime@googlegroups.com.<br />
To unsubscribe from this group, send email to e-prime+unsubscribe@googlegroups.com.<br />
To view this discussion on the web visit <a href="https://groups.google.com/d/msg/e-prime/-/L1Ya3DpyYXsJ">https://groups.google.com/d/msg/e-prime/-/L1Ya3DpyYXsJ</a>.<br />
For more options, visit <a href="https://groups.google.com/groups/opt_out">https://groups.google.com/groups/opt_out</a>.<br />
<br />
<br />