[sw-l] SignPuddle

Stephen Slevinski slevin at PUDL.INFO
Thu Oct 7 16:22:56 UTC 2004


Hi Sandy,

Sign Puddle worked properly, but the browser confused you by displaying
cached information.

Here's what happened.

1) Deleting Wales worked.
2) Renaming Wales_2 to Wales worked; however, the browser was using the
cached version of Wales.png.  You should have noticed that the load button
was present.  Pressing refresh on the page would have reloaded the correct
graphic.
3) I'm betting you pressed the back button.  This reloaded the previous page
which contained a delete Wales command.  This deleted Wales, which was
Wales_2 renamed.  Then all the Wales signs were gone.

I can look into forcing a reload on the graphic after renaming.  I can also
look into blocking the delete command when the back button is used to reload
a page.

Sorry for the inconvenience.
-Stephen

-----Original Message-----
From: owner-sw-l at majordomo.valenciacc.edu
[mailto:owner-sw-l at majordomo.valenciacc.edu]On Behalf Of Sandy Fleming
Sent: Thursday, October 07, 2004 9:52 AM
To: sw-l at majordomo.valenciacc.edu
Subject: RE: [sw-l] SignPuddle


Hmmm... is there a bug?

I had Wales and Wales_2, and I deleted Wales

I then renamed Wales_2 to Wales, and it did so but displayed the old "Wales"
sign instead.

But now when I search for Wales in the dictionary, it says no results
found - so both have been deleted!

How come this sort of thing only happens to me?  :D

Sandy

> -----Original Message-----
> From: owner-sw-l at majordomo.valenciacc.edu
> [mailto:owner-sw-l at majordomo.valenciacc.edu]On Behalf Of Stephen
> Slevinski
> Sent: 07 October 2004 13:26
> To: sw-l at majordomo.valenciacc.edu
> Subject: RE: [sw-l] SignPuddle
>
>
> Hi Sandy,
>
> Open the Sign Puddle dictionary.  Select the Dictionary Editors
> icon on the
> left.  It is directly under the Sign Maker icon.
>
> In the Search for Sign edit box, enter "Wales".  Press Search.
> You will see
> Wales and Wales_2.  Next to Wales_2, you will notice the Load
> button.  This
> button can load the sign into Sign Maker.  Any sign with the load button
> will never need to be reentered again: it has a build file and is
> written in
> the IMWA.  Also, it will be included in the SWML-S output for the
> SignPuddle
> dictionary, so other software should eventually be able to use it without
> having to reenter it.
>
> Since you were invited to be an editor for the sgn-GB dictionary,
> you have a
> username and password.  On the Dictionary Editor screen, scroll
> down to the
> bottom, past the flags.  You will notice the area where you can enter the
> user and password.  Login. (case sensitive)
>
> Now you can rename and delete signs.
>
> Let me know if you have any problems.
> -Stephen
>
> -----Original Message-----
> From: owner-sw-l at majordomo.valenciacc.edu
> [mailto:owner-sw-l at majordomo.valenciacc.edu]On Behalf Of Sandy Fleming
> Sent: Thursday, October 07, 2004 6:20 AM
> To: sw-l at majordomo.valenciacc.edu
> Subject: [sw-l] SignPuddle
>
>
> Hi Folks!
>
> I had a go at updating one of the old signs in the BSL SignPuddle
> dictionary
> and all seems in order except I now have signs called "Wales" and
> "Wales_2".
>
> How do I delete the older sign and rename the new one to "Wales"?
>
> I chose this sign first because I found a much better way to spell it - so
> don't be surprised at how different the two are!
>
> Am I right in thinking that all the signs in the dictianary should now be
> re-entered using SignMaker? SignMaker is mature enough now, isn't it? I
> woon't have to go re-entering all the signs again in the future, will I?
>
> Sabdy
>
>
>
>



More information about the Sw-l mailing list