Code to enable input from a Serial Response Button Box

[ms]

Dear David,

Thanks a lot for your suggestions and advice. One more solution
someone else pointed out was that I should rebut my computer before
trying anything else.
Thanks again for your help.


On Jun 30, 7:31 pm, David McFarlane <mcfar... at msu.edu> wrote:
> At 6/30/2008 10:40 AM Monday, you wrote:
>
> >Following my previous email, I can now see and select the serial
> >response button box, but when I try to run the experiment I get the
> >following error message:
>
> >Run-time Error (Line 351)
> >10051: An error occurred while attempting to open the device
>
> >Error: 0x00004a49
> >Message: 'Unable to open the SRBOX: 0x00000005
>
> >The SRBox Device Driver may not be installed'
>
> >I do not know where this problem results from. Any suggestions would
> >be much appreciated.
>
> With a message like that, the first thing I would do is to install
> the SRBox device driver.  If you cannot find the installation program
> on your E-Prime CD, download it from the Misc section of the PST
> Download Area,http://support.pstnet.com/e%2Dprime/support/download.asp?Type=Misc
> (you will have to login).  Better yet, just reinstall E-Prime from
> scratch and make sure that you install the SRBox driver when asked.
>
> Beyond that, make sure that the E-Prime settings for port, baud rate,
> and CPS match those of your SRBox.  Then, according to my SRBox
> manual (I have never used a microphone myself), the voice key should
> appear as button 6.  Finally, make sure your microphone is compatible
> with the SRBox, e.g., see the PST Forum thread athttp://support.pstnet.com/forum/Topic395-8-1.aspx.
>
> -- David McFarlane, Professional Faultfinder
>
>
>
> >On Jun 30, 11:02 am, ms <annh... at yahoo.com> wrote:
> > > Dear all,
>
> > > I would like to collect RTs through a microphone that is connected to
> > > a serial response button box. I was told that I need to use a code
> > > (script?) to be able toenablethe button box as aninputdevice for
> > > the appearing image I want the response to be given to. Could you
> > > please suggest a way to do that?
>
> > > Thanks in advance!- Hide quoted text -
>
> - Show quoted text -
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "E-Prime" group.
To post to this group, send email to e-prime at googlegroups.com
To unsubscribe from this group, send email to e-prime-unsubscribe at googlegroups.com
For more options, visit this group at http://groups.google.com/group/e-prime?hl=en
-~----------~----~----~----~------~----~------~--~---