subliminal priming

[liwenna]

Hey,

I looked around a bit and I think the link in this page downloads a
estudio file with subliminal exposure in it:
http://www.docstoc.com/docs/5417962/Instructions-for-running-the-E-Prime-program.
It's part of some book... and it also mentions some other usefull
things. I think there really isn't all that much special to the design
of a subliminal task... simply make the exposureduration on the
primeslide really short (dependent on the exact nature of your task)
and ussually you'll want to show a mask right after your prime but
this is, again, dependent on the nature of your task. Then consider
options like enabling preloading and disabling showafter (all should
be explained in the mentioned chapter in the user-guide), and make
sure that your hardware is actually capable of subliminal
presentation.

Greetz,

liwenna


On Aug 17, 8:25 am, Kim Janssens <kim.jansse... at gmail.com> wrote:
> Hello liwenna,
>
> Thank you for your fast reply: the advice on the refresh rate is really
> helpful! If I come across any specific problems when building, I will post
> my question again.
>
> greetz,
> Kim
> ps: do you know where i could find an example of experiments designed for
> subliminal priming? they could help me on the way..
>
> 2009/8/15 liwenna <liwe... at gmail.com>
>
>
>
> > Hello Kim,
>
> > Perhaps you could elaborate a bit on what part of designing the
> > experiment you need help with.
> > In general I think you should start with reading chapter 3 and
> > appendix A of the user guide (top of my head), which deal with timing
> > issues, obviously important for subliminal priming. Only other thing
> > that I can think of now is the monitor issue... make sure that you use
> > a monitor (when doing the experiment) that is actually capable of
> > subliminal-range exposure time i.e. has a sufficiently high enough
> > refresh rate.
>
> > I'm guessing that you're relatively new to e-prime (forgive me if I'm
> > wrong there). I think it's the most easiest if you simply start
> > building and post back here with problems that you encounter along the
> > way.
>
> > Good luck with it!
>
> > liwenna
>
> > On Aug 14, 2:20 pm, kimio <kim.jansse... at gmail.com> wrote:
> > > Hello group,
>
> > > I want to design an experiment in eprime in which I want to show the
> > > participants a set of pictures and subliminally prime them with a word
> > > in between the pictures.. Does anyone have any experience with this?
> > > All help is welcome...
>
> > > thanks,
> > > Kim
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "E-Prime" group.
To post to this group, send email to e-prime at googlegroups.com
To unsubscribe from this group, send email to e-prime+unsubscribe at googlegroups.com
For more options, visit this group at http://groups.google.com/group/e-prime?hl=en
-~----------~----~----~----~------~----~------~--~---