Connecting E-Prime to Biopac

[Evertox]

Can you use a Measurement Computing DIO 24 card with E-Prime?

On Nov 6, 12:43 pm, Peter Quain <pqu... at une.edu.au> wrote:
> Hi Anthony
>
> Perhaps you could still use the DIO card? It would have
> documentation, and you could just write to its port address
>
> Peter
>
> At 11:21 PM 6/11/2009, you wrote:
>
>
>
> >Hi,
>
> >I am currently trying to trigger a Biopac system from E-Prime using an
> >STP100 and MP30. This works fine using a PCI DIO-24 digital card from
> >SuperLab but not when connected to the parallel port with E-Prime.
>
> >Has anyone used this combination in the past, and if so could you
> >supply the cable pin-outs between the two.
> >Note, this is an STP100 and not an STP100C. I have been in contact
> >with BIOPAC and whilst they have supplied a standard cable and an E-
> >Prime .es test program, the triggers do not appear.
>
> >A pulse can be measured on D0 from the parallel port but seems to be
> >dragged down when connected to the STP100 opto-isolator.
>
> >I know this is a hardware issue but surely there must be E-Prime users
> >that have tried this combination previously. I would appreciate any
> >help concerning this issue.
>
> >Thanks
>
> >Anthony McGuffie
> >Coventry University- Hide quoted text -
>
> - Show quoted text -
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "E-Prime" group.
To post to this group, send email to e-prime at googlegroups.com
To unsubscribe from this group, send email to e-prime+unsubscribe at googlegroups.com
For more options, visit this group at http://groups.google.com/group/e-prime?hl=en
-~----------~----~----~----~------~----~------~--~---