E-Prime 1.1 in Windows 7 (64 bit)

[kommunaut]

Hi - I have the same problem: E-Prime / HASP Dongle / Windows 7 64 Bit
Did you - or somebody else - manage to get it running?
What's the trick?!
Thanks a lot!
Stefan

On 5 Jan., 11:28, Gilgamesh <fblanc... at gmail.com> wrote:
> Hello David,
>
> Thanks for your answers.
> You got me, I could use an old computer I have in the office to open
> those files, but I would be happy if I manage to run EP on my brand
> new laptop, so that I can work at home :-)
>
> Best,
> Fernando
>
> On 4 ene, 22:00, David McFarlane <mcfar... at msu.edu> wrote:
>
> > Fernando,
>
> > Just some thoughts...  Could you install 32-bitXPunder avirtual
> > machine and install EP1.1 under that?  Or, could you install EP2
> > under Win7 64 bit and open the EP1.1 file through EP2?  Hmm, AFAIK EP
> > does not run under 64 bits, but I would be glad to be corrected
> > there, and you might try doing your own search for "64" or whatever.
>
> > Finally, how about just installing EP1.1 on another computer that
> > still runs good old WinXP?  Shouldn't be hard to find one of those,
> > and might be a lot easier than trying to EP1.1 to run under
> > Win7-64.  Unless running the old EP1.1 files is just an excuse to try
> > getting EP1.1 running under Win7-64 :).
>
> > -- David McFarlane, Professional Faultfinder>I need to use some old E-Studio v 1.1 files, but I cannot even install
> > >E-Prime 1.1 in my computer (Windows 7 64 bits).
> > >The problem might be easier to solve than it seems. I installed the
> > >drivers of the HASP USB key (Win 7 64 bits version) and the key shows
> > >the nice red LED.
> > >But then the installation process stops because the key is not
> > >recognized by the computer. According to the Aladdin DiagnostiX, the
> > >key is not there!
>
> > >Was somebody able to install the hardware key in a 64 bits based
> > >system?
>
> > >I could use Ubuntu as well, if somebody tell me it can be achieved...
>
> > >Thanks,
> > >Fernando

-- 
You received this message because you are subscribed to the Google Groups "E-Prime" group.
To post to this group, send email to e-prime at googlegroups.com.
To unsubscribe from this group, send email to e-prime+unsubscribe at googlegroups.com.
For more options, visit this group at http://groups.google.com/group/e-prime?hl=en.