Time drift between 2 different data streams

[francesco biondi]

Thanks for the answer.
I m trying to send signals from the simulator to e-prime.
i want e-prime to read this signal several times during the exp; how
can i do it?
best, which command i have to use to let e-prime do it?
do you think it's possible let e-prime to read the signal every, for
example, 20 minutes , or it's better
send this signal from the simulator every cycle (100 cycles - 100
identical item - in 35 minutes) and let e-prime read it everytime?

On Mar 22, 10:33 am, Michiel Spape <Michiel.Sp... at nottingham.ac.uk>
wrote:
> Hi,
> This is a weird problem, but I would assume (hope?) that the time you get from the simulator is the problem, not the one from E-Prime. If you think it's e-prime: do you have the latest version of 1 (1.2) or 2? Are you running E-Prime on some kind of laptop or computer with dynamic processor?
> Anyway, this is why, generally, if you use two different data streams, you synchronise more often - try to implement that. Scaling the clock is unlikely to work, since it's very probable that the time drift isn't linear, so if, for instance, the time drift occurred halfway during the experiment, a linear correction would make ALL your data invalid, rather than half of it.
> Also, you could try send live pulses from E-Prime to the simulator and just use all the data in there (or vice versa). A bit of work, but it saves despairing afterwards.
>
> Best,
> Mich
>
> Michiel Spapé
> Research Fellow
> Perception & Action group
> University of Nottingham
> School of Psychologywww.cognitology.eu
>
>
>
>
>
>
>
> -----Original Message-----
> From: e-prime at googlegroups.com [mailto:e-prime at googlegroups.com] On Behalf Of francesco biondi
> Sent: 21 March 2011 16:12
> To: E-Prime
> Subject: Time drift between 2 different data streams
>
> Hello!!
> I m using eprime in a experiment where a subject, driving a simulator,
> has to use a microphone connected with a SRBox.
> After merged the data from the 2 different data streams, i ve noticed
> a time drift occurred between the 2 streams : e-prime times -
> synchronized with the simulator times during the first part of the exp
> - were drifted by the simulator times of 2.5 seconds at the end of the
> experiment.
> Do you know how i can solve this problem?
> rescaling the eprime clock could help me?
>
> --
> You received this message because you are subscribed to the Google Groups "E-Prime" group.
> To post to this group, send email to e-prime at googlegroups.com.
> To unsubscribe from this group, send email to e-prime+unsubscribe at googlegroups.com.
> For more options, visit this group athttp://groups.google.com/group/e-prime?hl=en.
>
> This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it.   Please do not use, copy or disclose the information contained in this message or in any attachment.  Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham.
>
> This message has been checked for viruses but the contents of an attachment
> may still contain software viruses which could damage your computer system:
> you are advised to perform your own checks. Email communications with the
> University of Nottingham may be monitored as permitted by UK legislation.

-- 
You received this message because you are subscribed to the Google Groups "E-Prime" group.
To post to this group, send email to e-prime at googlegroups.com.
To unsubscribe from this group, send email to e-prime+unsubscribe at googlegroups.com.
For more options, visit this group at http://groups.google.com/group/e-prime?hl=en.