Parallel Port

[Hank Jedema]

Dear David & Paul,
That does the trick. Thanks very much for your quick assistance.
Hank

On Tuesday, March 12, 2013 2:22:44 PM UTC-4, Hank Jedema wrote:
>
> I had to install E-Prime 2.0.8.90 on some newer PCs (Dell Optiplex 390) 
> which lack a integrated parallel port. I do need the parallel port to send 
> signals to external equipment (just output, no input needed), so I 
> installed a parallel port adapter card (StarTech PEX1PLP) in the PCIe slot, 
> which seems to configure properly under W7: It is listed as LPT1 in the 
> device manager, shows 2 lines on resources tab: I/O range 4010-4017 and I/O 
> range 4000-4003, and is "working properly" according to W7. 
> Normally, I address the parallel port in E-Prime with an inline "writeport 
> &H378, value" but hat does not seem to work (measured with voltmeter at the 
> parallel port connector pins 2-5). At this point, I am wondering whether I 
> have to address the port on the adapter card in a different manner than the 
> traditional, integrated parallel ports.  I looked through the parallel port 
> info on the E-prime site and posted a question with their support but have 
> not heard back yet. Does anyone have experience addressing parallel ports 
> on adapter cards with E-prime ?
>
> Thanks very much for your help,
>
> Hank Jedema
> Jedema_at_pitt.edu
>

-- 
You received this message because you are subscribed to the Google Groups "E-Prime" group.
To unsubscribe from this group and stop receiving emails from it, send an email to e-prime+unsubscribe at googlegroups.com.
To post to this group, send email to e-prime at googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msg/e-prime/-/FuGO3Ed7ajsJ.
For more options, visit https://groups.google.com/groups/opt_out.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listserv.linguistlist.org/pipermail/eprime/attachments/20130313/0171063f/attachment.htm>