Alternative PCI card to interface with Biopac

Thu May 22 18:42:03 UTC 2014

Hi Paul and David,

Thank you so much for your help- it is much appreciated.  Embarrassingly, I 
mistakenly gave you some incorrect information.    

Actually, the 25-pin printer port on the MP150 is already connected to the 
parallel port on the E-Prime computers.  And yes, the Optiplex's have this 
port already, so that should be easy enough to replicate.  The NI PCI-6503 
card in the PCI slot (that can't be replicated on the new computers) 
actually goes through an adapter and then connects to individual ports on 
the back of the UIM100C module of the MP150.  To be honest, I'm actually 
not entirely sure of the differentiation between this connection and the 
printer port- parallel port connection for port forwarding from E-Prime.

Any idea what this connection is actually being used for?  I'm a bit lost.

Best,
Erik

On Thursday, May 22, 2014 9:58:27 AM UTC-6, McFarlane, David wrote:
>
> As Paul said, installing a simple parallel port 
> adapter may do what you need here.  You could use 
> that from E-Prime using the older Port Device, or 
> the using newer ParallelPort Device, perhaps 
> combined with the newer Task Events feature. 
>
> But, if you don't mind, I'm a bit curious, and I 
> would like to pass on some other 
> information.  So, you currently use the NI 
> PCI-6503, which provides 24 bits of digital 
> I/O.  How do you use that with E-Prime?  Do you 
> just addres it with the E-Prime Port Device?  Or 
> does the NI PCI-6503 come with its own routine 
> library that you must call from E-Prime?  How do you do that? 
>
> If you really need a replacement for the NI 
> PCI-6503, and do not mind calling external 
> library routines from E-Prime, then you could 
> look at various devices from Measurement 
> Computing (http://www.mccdaq.com/ ) or LabJack 
> (http://labjack.com/ ).  These companies offer 
> devices that connect to any computer via USB to 
> provide digital I/O.  You then control them from 
> E-Prime using the supplied libraries.  We have 
> had good results using a D/A USB device from 
> Measurement Computing, I would would expect 
> similar good resutls with their digital I/O devices. 
>
> ----- 
> David McFarlane 
> E-Prime training 
> online:  http://psychology.msu.edu/Workshops_Courses/eprime.aspx 
> Twitter:  @EPrimeMaster (https://twitter.com/EPrimeMaster) 
>
> /---- 
> Stock reminder:  1) I do not work for PST.  2) 
> PST's trained staff take any and all questions at 
> https://support.pstnet.com , and they strive to 
> respond to all requests in 24-48 hours, so make 
> full use of it.  3) In addition, PST offers 
> several instructional videos on their YouTube 
> channel (http://www.youtube.com/user/PSTNET 
> ).  4) If you do get an answer from PST staff, 
> please extend the courtesy of posting their reply 
> back here for the sake of others. 
> \---- 
>
>
> At 5/22/2014 06:49 AM Thursday, Paul Groot wrote: 
> >Hi Erik, 
> > 
> >We just use a simple parallel port adapter card 
> >to be used in a PCI slot (From Startech, but If 
> >I remember correctly, PST has a list on their 
> >website with compatible cards.) If the optiplex 
> >comes with a built-in parallel port, their is no 
> >need to use the PCI card to add an additional 
> >port anyway. In our setup, we only use the 8 
> >databits as output from the PC to the biopac 
> >system, using a customized cable. Biopac also 
> >offers a cable that can be used without 
> >modifications to have 8 output and 4 inputs: 
> ><http://www.biopac.com/Product_Spec_PDF/STP100C.pdf>
> http://www.biopac.com/Product_Spec_PDF/STP100C.pdf. 
> > 
> >Best, 
> >Paul 
> > 
> > 
> > 
> > 
> >On 21 May 2014 18:00, ekwing 
> ><<mailto:erik... at gmail.com <javascript:>>erikkwing at gmail.com<javascript:>> 
> wrote: 
> >Hello, 
> > 
> >First, I realize this question is a bit atypical 
> >as it's hardware, however, after talking with 
> >Biopac and local Tech services I wanted to make 
> >sure none of you had encountered the same issue and found a better 
> solution. 
> > 
> >Our current set-up for port forwarding involves 
> >a direct connection between a 
> ><http://sine.ni.com/nips/cds/view/p/lang/en/nid/1108>NI 
> >PCI-6503 card via the E-Prime computer's PCI 
> >slot and the MP150 25-pin printer port. Â 
> >However, we are currently in the process of 
> >upgrading our computers, and the new computers 
> >have a slimmer shell/tower that is not 
> >physically large enough to house the PCI-6503 in the PCI slot. 
> > 
> >Because, 
> ><http://www.pstnet.com/support/kb.asp?TopicID=3023>according 
> >to the E-Prime knowledge base, a USB to Parallel 
> >connection will not work, the only solution we 
> >have come up with so far is to 
> ><
> http://www.cooldrives.com/index.php/1popcto4xpci.html?fee=1&fep=63&utm_source=merchantcntr2014>purchase 
>
> >two of these (we have two set-ups). 
> > 
> >So, to simplify, my main question is this- Does 
> >anyone know of an alternative interface card 
> >that will adequately replace the NI PCI-6503 
> >that comes in a low-form factor design? Â If 
> >curious, the new computers are Dell Optiplex 380s. 
> > 
> >Thanks in advance for any help you can provide. 
>
>

-- 
You received this message because you are subscribed to the Google Groups "E-Prime" group.
To unsubscribe from this group and stop receiving emails from it, send an email to e-prime+unsubscribe at googlegroups.com.
To post to this group, send email to e-prime at googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/e-prime/d95cbf6a-6d7d-4b51-bbc5-3d2dcc1851e2%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listserv.linguistlist.org/pipermail/eprime/attachments/20140522/63559db7/attachment.htm>