Parallel Port

[Paul Groot]

As David suggested, I would try &H4010. We also have several StartTech
cards that operate on &2010 or &3010, depending on the hardware
configuration. (Which correpsonds to the W7 resource parameters.)

Paul

On 12 March 2013 19:22, Hank Jedema <Jedema at pitt.edu> wrote:

> I had to install E-Prime 2.0.8.90 on some newer PCs (Dell Optiplex 390)
> which lack a integrated parallel port. I do need the parallel port to send
> signals to external equipment (just output, no input needed), so I
> installed a parallel port adapter card (StarTech PEX1PLP) in the PCIe slot,
> which seems to configure properly under W7: It is listed as LPT1 in the
> device manager, shows 2 lines on resources tab: I/O range 4010-4017 and I/O
> range 4000-4003, and is "working properly" according to W7.
> Normally, I address the parallel port in E-Prime with an inline "writeport
> &H378, value" but hat does not seem to work (measured with voltmeter at the
> parallel port connector pins 2-5). At this point, I am wondering whether I
> have to address the port on the adapter card in a different manner than the
> traditional, integrated parallel ports.  I looked through the parallel port
> info on the E-prime site and posted a question with their support but have
> not heard back yet. Does anyone have experience addressing parallel ports
> on adapter cards with E-prime ?
>
> Thanks very much for your help,
>
> Hank Jedema
> Jedema_at_pitt.edu
>
> --
> You received this message because you are subscribed to the Google Groups
> "E-Prime" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to e-prime+unsubscribe at googlegroups.com.
> To post to this group, send email to e-prime at googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msg/e-prime/-/UVdrDQ--jMkJ.
> For more options, visit https://groups.google.com/groups/opt_out.
>
>
>

-- 
You received this message because you are subscribed to the Google Groups "E-Prime" group.
To unsubscribe from this group and stop receiving emails from it, send an email to e-prime+unsubscribe at googlegroups.com.
To post to this group, send email to e-prime at googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listserv.linguistlist.org/pipermail/eprime/attachments/20130312/44ff6be1/attachment.htm>