Using a Projector in an MRI

[Peter Quain]

Could be wrong here, but in my experience e-prime listens to the blanking
signal from the primary display, not the secondary. So we always make the
testing station display primary and clone it to the secondary display in the
control room.

 

From: e-prime at googlegroups.com [mailto:e-prime at googlegroups.com] On Behalf
Of Paul Groot
Sent: Saturday, 22 March 2014 11:37 AM
To: e-prime at googlegroups.com
Subject: Re: Using a Projector in an MRI

 

Hi,

 

This projector seems to be a regular LCD-type device that will be connected
to the video card of the PC. Just like a normal display, so for E-Prime
there is nothing special about this. Depending on the hardware setup, the
projector could be connected as primary display device, or as secondary
display device in an extended desktop configuration. In the latter case you
will have to specify the display number in the display device properties of
E-Studio to send the output to the correct video port. Also note that the
image quality is only optimal when the native resolution of the LCD is used
(1024x768). Other resolutions might be supported, but are displayed with
interpolated pixels. Brightness and pixel response times might be
sub-optimal for these kind of devices, so keep this in mind if that is
critical for your research.

 

Synchronization between the MRI scanner and E-Prime is typically done using
a digital trigger signal on one of the input ports of the PC (often a
printer port), or using a response device that converts the trigger signal
to a (simulated) key stroke (like the fORP response device interface). Most
configurations can be handled using one of the available input devices in
E-Studio, such as the Port, Parallel Port or keyboard device. Just consult
the local MR support technician about the details of the configuration.

 

Paul

 

 

On 21 March 2014 22:00, <kyleheidtman2012 at u.northwestern.edu> wrote:

Hi,

I've developing a visual search task to run in an MRI.  The MRI displays
images using a: "Hitachi CP X-505" video projector.

Are there any tips/suggestions on how to work with that display device in
EPrime?  Does the "screen" object still exist with that device?

Also, I've heard that it might be possible to make EPrime trigger the start
of the MRI.  Does anyone know how to do that?

-- 
You received this message because you are subscribed to the Google Groups
"E-Prime" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to e-prime+unsubscribe at googlegroups.com.
To post to this group, send email to e-prime at googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/e-prime/891c16db-f072-4561-aea0-a893fd439f
e5%40googlegroups.com
<https://groups.google.com/d/msgid/e-prime/891c16db-f072-4561-aea0-a893fd439
fe5%40googlegroups.com?utm_medium=email&utm_source=footer> .
For more options, visit https://groups.google.com/d/optout.

 

-- 
You received this message because you are subscribed to the Google Groups
"E-Prime" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to e-prime+unsubscribe at googlegroups.com.
To post to this group, send email to e-prime at googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/e-prime/CAKAdR-tbsjrhkRyM8sBy4_xLp2zc1HZqK
Che8batHPXDtir6yA%40mail.gmail.com
<https://groups.google.com/d/msgid/e-prime/CAKAdR-tbsjrhkRyM8sBy4_xLp2zc1HZq
KChe8batHPXDtir6yA%40mail.gmail.com?utm_medium=email&utm_source=footer> .
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "E-Prime" group.
To unsubscribe from this group and stop receiving emails from it, send an email to e-prime+unsubscribe at googlegroups.com.
To post to this group, send email to e-prime at googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/e-prime/002001cf4581%2407469e40%2415d3dac0%24%40une.edu.au.
For more options, visit https://groups.google.com/d/optout.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listserv.linguistlist.org/pipermail/eprime/attachments/20140322/ee83fcb4/attachment.htm>