Code Switching Topic: CLAN commands

[Toh An]

These are the COMBO commands which I have used which do not seem to work:

combo +t*TE1 +s"t%xcod: 1.2^*^t%xtsf: 4.5" +t%xcod +t%xtsf

combo +b2 +s"%xcod: 1.3^*^%xcod: 2.5" +t%xcod +t%xcod

On Monday, April 30, 2018 at 3:21:58 AM UTC+8, Toh An wrote:
>
> Dear all, 
>
> I have some questions on the use of COMBO commands to analyse code 
> switching topics in utterances.
>
> Firstly, I want to do a count of specific tier combinations (the same 
> tier; different codes), in a specific sequence across clusters using the 
> COMBO command.
>
>  
>
> e.g.:
>
> **TE1:*  utterance
>
> %xcod: 1.3
>
> %xtsf: 4.8
>
> **CH3:* utterance
>
> %xcod: 2.5
>
> %xcsf: 5.4
>
> è  I want to be able to specify the command to count the instances where 
> %xcod:  1.3 is followed by another code on the same tier %xcod:  2.5 but 
> across different clusters.
>
> è To use the command to count the instances of different sequences (for 
> example 1.1à2.5/ 2.6/ 2.7)
>
>  
>
> Secondly, I want to do a count of specific tier combinations (different 
> tiers; different codes), in a specific sequence within clusters using the 
> COMBO command
>
>  
>
> e.g.:
>
> **CH3*: utterance
>
> %xcod: 1.7
>
> %xcsf: 5.4
>
> **TE1*:  utterance
>
> %xcod: 1.2
>
> %xtsf: 4.2
>
> **CLS:*  utterance
>
> %xcod: 1.6
>
> è  I want to be able to specify the command to count the instances where 
> %xcod:  1.2 is followed by another code on a different tier %xtsf:  4.2 
> within the same clusters.
>
> è To use the command to count the instances of different sequences (for 
> example 1.1à4.1/4.2/4.3/4.4/4.5/4.6/4.7/4.8)
>
>  
>
>  
>
> Note:
>
> As shown above some utterances have two tiers of codes. All utterances 
> have the %xcod tier while some utterances by the speaker **TE1* have the 
> tier %xtsf, and some utterances by the speaker **CH#/CLS* have the %xcsf
>  tier.
>
> However, other utterances may not have two tiers, and only have the %xcod 
> tier.
>
> e.g.:
>
>  
>
> **TE1:*  utterance
>
> %xcod: 1.2
>
> **CH4:* utterance
>
> %xcod: 2.6
>
> **TE1:*  utterance
>
> %xcod: 3.2
>
> **TE1:*  utterance
>
> %xcod: 3.3
>
> %xtsf:  4.8
>
>  
>
> I have tried using the following COMBO commands but they do not seem to 
> produce results in the CLAN window. Could you provide some suggestions?
>
>
> Thank you so much.
>

-- 
You received this message because you are subscribed to the Google Groups "chibolts" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chibolts+unsubscribe at googlegroups.com.
To post to this group, send email to chibolts at googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/chibolts/254d4cc7-b995-4c51-807c-b622aaedd79d%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listserv.linguistlist.org/pipermail/chibolts/attachments/20180429/880f4bbf/attachment.htm>