Linking E-prime with Biopac (GSR)

[Paul Gr]

Hi Kevin,
You can use one of the standard options to activate the output lines of the parallel printer port. The following link is a good starting point: http://www.pstnet.com/e-prime/support/kb.asp?TopicID=1318.
 
Make sure that the pulse durations are long enough to be able to be acquired by biopac (i.e. at least several sample intervals.)
The STP100C unit we have connects to digital inputs 8 to 15, so make sure you configure the right digital channels.
 
best,
paul



> Date: Thu, 2 Aug 2007 13:49:47 -0400> From: kevinpeters at trentu.ca> To: eprime at mail.talkbank.org> Subject: Linking E-prime with Biopac (GSR)> > Hi,> We are trying to setup our Biopac GSR system so that we can send triggers from E-prime to analyze the GSR to certain stimuli. We do have the STP100C digital interface for the Biopac, but we just can't seem to get it to work. Does anyone have any suggestions?> > Thanks,> Kevin> > Kevin Peters, Ph.D.> Assistant Professor> Department of Psychology> Trent University> 1600 West Bank Drive> Peterborough, Ontario, Canada> K9J 7B8> > Phone: (705) 748-1011 x 7795> Fax: (705) 748-1580> > > 
_________________________________________________________________
Zoek met Live Search en ervaar het verschil. Test het NU, klik hier!
http://www.live.com/?mkt=nl-nl
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listserv.linguistlist.org/pipermail/eprime/attachments/20070802/3a59f922/attachment.htm>