need answers for SRbox, plz!

[David McFarlane]

Jiyoon,

On top of all that, please submit a request to PST Web Support at 
http://support.pstnet.com/e%2Dprime/support/login.asp .  After all, 
it is their job to make sure that you have all the instructions you 
need in order to make their equipment work.  Tell them that I sent you :).

Regards,
-- David McFarlane, Professional Faultfinder


At 12/6/2010 01:00 AM Monday, Michiel Spape wrote:
>Hi,
>This should indeed be the correct answer - that is to say, if the 
>lights on the SR Box stay on, it means the SR Box is not correctly 
>installed - either on the computer or on the experiment. Therefore:
>- Try the SRBox example programs from PST - if THEY don't work, you 
>can be pretty sure it's not YOUR experiment that is the problem.
>- If they indeed don't work, try reinstalling E-Prime (it should try 
>to install drivers for the SRBox - if you or someone had selected 
>'please don't install unverified drivers', it will have gone awry).
>- Check to see what Com Port the SRBox is actually on. If you don't 
>know how, ask your system administrator. E-Prime can only address 
>com ports 1-4, for some reason, so if you have installed a ton of 
>other stuff that uses these (i run into that problem quite often), 
>you may have some difficulty.
>Best,
>Mich
>
>
>----------
>From: e-prime at googlegroups.com [e-prime at googlegroups.com] On Behalf 
>Of Lidia Suarez [nusphd at gmail.com]
>Sent: 04 December 2010 03:54
>To: e-prime at googlegroups.com
>Subject: Re: need answers for SRbox, plz!
>
>Hi Jiyoon,
>
>This may sound stupid...but you may give it a try...have you tried 
>to switch on the SR box before the computer is on? The lights will 
>be on but then when you run the experiment the lights should go off. 
>If I switch on the box once the Eprime is open, the computer does 
>not recognise the device. Also make sure you have added that device 
>in your experiment (check the manual). Also you can make sure that 
>when Eprime was installed,  "yes" was pressed to a message asking 
>whether you are using SR box or one message alike.
>
>Regards,
>Lidia
>
>
>
>On Sat, Dec 4, 2010 at 10:30 AM, Megan Andrejczuk 
><<mailto:meg.andrejczuk at gmail.com>meg.andrejczuk at gmail.com> wrote:
>
>Have you used the test software that comes with the srbox to test 
>the other functions?
>On Dec 3, 2010 8:34 PM, "coglab760" 
><<mailto:hahajy15 at gmail.com>hahajy15 at gmail.com> wrote:
> > To whom it may concerned,
> >
> > Hello, I'm on the master program in Cognitive Phychology at Ewha
> > Womans University.
> > We have some problems to use the SR box for our experiment using a
> > naming task.
> >
> > Our lab have recently perchased a new computer and E-Prime 2.0.
> > We want to make a procedure for a naming experiment using the SR box
> > and the voice key.
> > However, the SR box doesn't work.
> > The lights of the buttons of the box are always on, which seems to be
> > a problem.
> > And the keys cannot be detected by E-Prime.
> >
> > We use Windows XP with Inter Core Quad.
> > I've already tried to change com port numbers, but it didn't work.
> > How can I fix this?
> > Or do you think there could be another problems besides the box, such
> > as the microphone?
> >
> > Any Answers Welcomed and Appreciated.
> > Thank you.
> >
> > Sincerely,
> > Jiyoon

-- 
You received this message because you are subscribed to the Google Groups "E-Prime" group.
To post to this group, send email to e-prime at googlegroups.com.
To unsubscribe from this group, send email to e-prime+unsubscribe at googlegroups.com.
For more options, visit this group at http://groups.google.com/group/e-prime?hl=en.