need answers for SRbox, plz!

[Elizabeth]

I am also having a lot of difficulty with SR Box. We are running
Windows 7, but working with another lab that has the same computers
who are running things just fine. We are doing response time
measurements and getting the "no reponse detected message." Also, it
works once, the first time we turn everything on, but we have multiple
sets and can't get it to move to the next and detect the keys. Does
anyone have any other ideas?

Elizabeth
University of Houston



On Dec 6, 12:03 pm, David McFarlane <mcfar... at msu.edu> wrote:
> Jiyoon,
>
> On top of all that, please submit a request to PST Web Support athttp://support.pstnet.com/e%2Dprime/support/login.asp.  After all,
> it is their job to make sure that you have all the instructions you
> need in order to make their equipment work.  Tell them that I sent you :).
>
> Regards,
> -- David McFarlane, Professional Faultfinder
>
> At 12/6/2010 01:00 AM Monday, Michiel Spape wrote:
>
>
>
> >Hi,
> >This should indeed be the correct answer - that is to say, if the
> >lights on the SR Box stay on, it means the SR Box is not correctly
> >installed - either on the computer or on the experiment. Therefore:
> >- Try the SRBox example programs from PST - if THEY don't work, you
> >can be pretty sure it's not YOUR experiment that is the problem.
> >- If they indeed don't work, try reinstalling E-Prime (it should try
> >to install drivers for the SRBox - if you or someone had selected
> >'please don't install unverified drivers', it will have gone awry).
> >- Check to see what Com Port the SRBox is actually on. If you don't
> >know how, ask your system administrator. E-Prime can only address
> >com ports 1-4, for some reason, so if you have installed a ton of
> >other stuff that uses these (i run into that problem quite often),
> >you may have some difficulty.
> >Best,
> >Mich
>
> >----------
> >From: e-prime at googlegroups.com [e-prime at googlegroups.com] On Behalf
> >Of Lidia Suarez [nus... at gmail.com]
> >Sent: 04 December 2010 03:54
> >To: e-prime at googlegroups.com
> >Subject: Re: need answers for SRbox, plz!
>
> >Hi Jiyoon,
>
> >This may sound stupid...but you may give it a try...have you tried
> >to switch on the SR box before the computer is on? The lights will
> >be on but then when you run the experiment the lights should go off.
> >If I switch on the box once the Eprime is open, the computer does
> >not recognise the device. Also make sure you have added that device
> >in your experiment (check the manual). Also you can make sure that
> >when Eprime was installed,  "yes" was pressed to a message asking
> >whether you are using SR box or one message alike.
>
> >Regards,
> >Lidia
>
> >On Sat, Dec 4, 2010 at 10:30 AM, Megan Andrejczuk
> ><<mailto:meg.andrejc... at gmail.com>meg.andrejc... at gmail.com> wrote:
>
> >Have you used the test software that comes with the srbox to test
> >the other functions?
> >On Dec 3, 2010 8:34 PM, "coglab760"
> ><<mailto:hahaj... at gmail.com>hahaj... at gmail.com> wrote:
> > > To whom it may concerned,
>
> > > Hello, I'm on the master program in Cognitive Phychology at Ewha
> > > Womans University.
> > > We have some problems to use the SR box for our experiment using a
> > > naming task.
>
> > > Our lab have recently perchased a new computer and E-Prime 2.0.
> > > We want to make a procedure for a naming experiment using the SR box
> > > and the voice key.
> > > However, the SR box doesn't work.
> > > The lights of the buttons of the box are always on, which seems to be
> > > a problem.
> > > And the keys cannot be detected by E-Prime.
>
> > > We use Windows XP with Inter Core Quad.
> > > I've already tried to change com port numbers, but it didn't work.
> > > How can I fix this?
> > > Or do you think there could be another problems besides the box, such
> > > as the microphone?
>
> > > Any Answers Welcomed and Appreciated.
> > > Thank you.
>
> > > Sincerely,
> > > Jiyoon- Hide quoted text -
>
> - Show quoted text -

-- 
You received this message because you are subscribed to the Google Groups "E-Prime" group.
To post to this group, send email to e-prime at googlegroups.com.
To unsubscribe from this group, send email to e-prime+unsubscribe at googlegroups.com.
For more options, visit this group at http://groups.google.com/group/e-prime?hl=en.